How to use mirror
In this tutorial, you will create this part.
1.Click New. 
Click Part,
OK.
2.Click Front Plane 
and click on Sketch.
3.Click Rectangle, 
sketch rectangular. Click Smart Dimension, 
dimension rectangular 3in x 3in.
4.Click Feature>Extruded Boss/Base, 
set D1 to 1.0in and OK. 
5. Click on front face and select Normal to.
6.Click front face and Insert Sketch.
7.Click Circle, 
sketch circle at one edge.
8.Click Smart Dimension, 
dimension circle as below sketch.
9.Click Features>Extruded Cut,
set Direction 1, Through All and OK. 
10. Click View Orientation, select Isometric View.
11. To add mirror plane, click Reference Geometry>Plane.
12. Click right side face, set distance to 1.5in, check Reverse direction
and OK. 
13. Click on Extrude2, 
click Mirror,
select Plane 1 and OK.
14. To hide mirror plane, click Plane 1, select hide.
15. You’re done!
Learn SolidWorks today! I’ve wrote a complete SolidWorks 2008/2009 Beginner Tutorials e-book for you to start with, get it now! Instantly download complete tutorials limited time offer price ($9.95 USD). Buy now!
Learn SolidWorks today! I’ve wrote a complete SolidWorks 2007 Beginner Tutorials e-book for you to start with, get it now! Instantly download complete tutorials limited time offer price ($9.95 USD). Buy now!
Popular Post:
How to create coil springsHow Solidworks works?
How to create simple part
How to create 17" wheel
How to create turbo fin
Leave a Reply