Small DC motor tutorials (Part 1)
In this SolidWorks tutorial, I will show you how to model small dc motor in metric system (mm).
1. Click New. 
Click Part, 
OK.
2. Lets change part dimensioning system to Metric system, click Option
click on Document Properties
Click on Units
click MMGS
and OK.
3. Click Top Plane and click on Sketch.
click on Center Rectangle,
sketch a rectangle start at origin and use Smart Dimension 
and dimension it to 15mm x 20mm.
4. Click Features>Extruded Boss/Base 
set D1 to 20mm and OK.
5. Click Fillet 
, check box Full round fillet.
click first box and select one side of the side body, click on second box and click middle face and click third box and click the opposite face.
and OK.
6. Repeat step 5 for the other side.
7. Click on top face and click Sketch.
8. Click Circle 
, sketch a circle start at origin and use Smart Dimension and dimension to 6mm.
9. Click Features>Extruded Boss/Base set D1 to 1.6mm and OK.
10. Click 
and set D1 to 0.5mm select and click top surface and bottom face
and OK.
11. Save the part base Case.sldprt
wait for next part.. 
Learn SolidWorks today! I’ve wrote a complete SolidWorks 2010 Beginner Tutorials e-book for you to start with, get it now! Instantly download complete tutorials limited time offer price ($9.95 USD). Buy now!
4 Responses to “Small DC motor tutorials (Part 1)”
Leave a Reply
Blog Sponsors
Popular Post:
How to create coil springsHow Solidworks works?
How to create simple part
How to create 17" wheel
How to create turbo fin
November 14th, 2009 at 1:02 am
Really good tutorial. hopefully, i will gain lot from this stuff. thanks a lot author
December 29th, 2009 at 5:35 am
Thanks for this tutorials. please continue to develop it to beat another Cad system.
February 21st, 2010 at 1:29 am
Thank you for your training i learn from you :p
May 20th, 2010 at 12:11 pm
very good tutorials, thank you very much