A step by step guide
Tutorial 1 – SolidWorks User Interface
Tutorial 2 – Introduction to SolidWorks
Tutorial 3 – How to create simple box
Tutorial 4 – How to create simple plate
Tutorial 5 – How to create allen key
Tutorial 6 – How to create 17" wheel
Tutorial 7 – How to sheet metal part
Tutorial 8 – How to create spring
Tutorial 9 – How to engrave text
Tutorial 10 – How to create hex bolt
Tutorial 11 – How to create helical gear
Tutorial 12 – How to create aeroplane wings
Tutorial 13 – How to create turbo fins
Tutorial 14 – How to create U bracket
Tutorial 15 – How to create bottle cap
Tutorial 16 – How to create usb head
Tutorial 17 – How to twist phone cord
Tutorial 18 – How to engrave text
Tutorial 1 – How to use Revolved Boss/Base
Tutorial 2 – How to use Revolved Cut
Tutorial 3 – How to use Linear Pattern
Tutorial 4 – How to use Scale
Tutorial 5 – How to use Hole Wizard
Tutorial 6 – How to use Shell
Tutorial 7 – How to use Swept Boss/Base
Tutorial 8 – How to use Lofted Boss/Base
Tutorial 9 – How to change to metric units
It’s possible to model this bracket with two lines with SolidWorks, use extrude thin features! First make L sketch and directly extrude the sketch, look at thin feature and set thickness. This feature is simple and quick, it save your time without having to sketching offset and dimensioning the sketch…
Previous post: How to make bracelet in SolidWorks
Next post: How to mirror part in SolidWorks
If you're new to SolidWorks, I would recommend you get my SolidWorks Tutorial Beginner ebook.
Zack,
SolidworksTutorials.com Editor.
{ 0 comments… add one now }